EasyManua.ls Logo

Hermle OLEUM - Page 37

Hermle OLEUM
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDIX
© Hermle Labortechnik GmbH OLEUM_V1.19_eng III
Table 1: Technical Data
Manufacturer
HERMLE Labortechnik GmbH, 78564 Wehingen
Type
OLEUM
Dimensions
Width
56 cm
Depth
64 cm
Height
41 cm
Weight without rotor
72 kg
Max. Speed
3000 min
-1
Max. Volume
4 x 100 ml
Max. RCF
2,213 x g
Allowable Density
1.2 kg/dm
3
Allowable Kinetic Energy
2857 Nm
Mains Power Connection AC
230 V / 50-60 Hz 1 ph
Voltage Fluctuation
± 10 %
Current Consumption
4,1 A
Power Consumption
950 W
Radio Interference
IEC 61326-1
Audit Requirement (BGR 500)
no
Ambient Conditions (EN/IEC 61010-1)
-
Environment
-
High
- Ambient Temperature
- Max. Relative Humidity
- Overvoltage category (IEC 60364-4-443)
- Degree of Contamination
For Indoor Use Only
Use up to an altitude of 2000 m above MSL
2°C up to 35 °C
Max. relative humidity 80 % for temperatures up to 31°C,
decreasing linearly to 50 % relative humidity up to 35°C.
II
2
Class of Protection I
Case of Protection (DIN EN 60529) IP
Not suitable for use in hazardous environments.
EMV
Interference Emission , Noise
EN / IEC
61326-1
Category B
FCC Class B
Noise Level (depending on the rotor)
≤ 55 dB(A)
Write from Operator
Inventory-No.:
Monitoring-No.:
Environment:
Maintenance Contract:
Responsible Service Office
HERMLE Labortechnik GmbH
or dealer service office
Siemensstra
ß
e 25
78564 Wehingen
Tel.: (49)7426 / 96 22-17
Fax: (49)7426 / 96 22-49
Responsible Dealer

Table of Contents