70
(2) Tail/stop lamp bulb
(d) Rear turn signal bulb
•
Remove the body covers with tail/stop lamp
assembly (page 36).
•
Install the body covers with tail/stop lamp
assembly (page 39).
•
Install a new tail/stop lamp bulb (2) in the
reverse order of removal.
•
Install the body covers with tail/stop lamp
assembly (page 39).
•
Install a new bulb in the reverse order of
removal.
•
Remove turn signal bulb holder (1) by
turning anticlockwise.
•
Remove the rear turn signal bulb (2) by
pressing it in and turning anticlockwise.
(e) Licence plate lamp bulb
•
Remove licence plate lamp bulb holder (1)
from the rear fender (2).
(1) Bulb holder (2) Rear turn signal bulb
1
(1) Licence plate lamp bulb holder
(2) Rear fender
1
2
•
Remove the licence plate lamp bulb (3)
from the holder.
2
2
To Next Page
Loading...
