EasyManua.ls Logo

HERO Passion Xpro - MAINTENANCE SCHEDULE

HERO Passion Xpro
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
To be serviced by your unless the owner has Authorised Hero MotoCorp workshop
the relevant tools, technical information and is technically qualified.
Note-7 : Inspect the bearings free play, replace if necessary.
Note-11: Inspect the canister hoses for deterioration, damage or loose connections and
MAINTENANCE SCHEDULE
Ensure that each paid service is availed within 90 days or 3000 km from the date of previous
service, whichever is earlier.
The following maintenance schedule specifies all maintenance required to keep your in vehicle
peak operating condition. Maintenance work should be performed in accordance with
standards and specifications of by properly trained and equipped Hero MotoCorp
technicians. Your Authorised Hero MotoCorp workshop meets all of these requirements.
Note-3 : Replace engine oil once in every 6000 km. Top up once in every 3000 km.
Note-4 : Visit Authorised Hero MotoCorp workshop for inspection, cleaning, lubrication
and adjustment of drive chain at every 2000 km.
Perform the Pre-ride inspection at each scheduled maintenance period. (page 21)
Note-5 : Replace once in a every 2 years or 30000 km, whichever is earlier.
In the interest of safety we recommend that these jobs are carried out only by your,
Authorised Hero MotoCorp workshop.
Note-6 : Inspect & maintain specified torque.
Note-1 : At higher odometer readings, repeat the frequency interval established here.
Note-8 : Replace front fork oil once in a every 2 years or 30000 km, whichever is earlier.
Note-9 : Inspect for any play in the mounting bushes, replace if necessary.
I: INSPECT C: CLEAN R: REPLACE A: ADJUST O: OIL CHANGE
L:LUBRICATE T: TOP UP E: EMISSION CHECK
Note-2 : Replace air cleaner element once in every 15000 km or early replacement may
be required when riding in dusty areas.
Note-10: Check idle CO emission along with idle r/min/idle CO adjustment (if required).
canister for cracks or other damages.
Note: Always wipe the water from the vehicle after washing. Use clean soft cloth or
pressurized air for completely drying the water.

Related product manuals