HERO Passion Xpro - Throttle Operation

38
•
Check the clutch cable for kinks or signs of
wear that could cause sticking or failure.
•
Check for clutch cable model. Use genuine
clutch cables.
Other checks
•
Start the engine, press the clutch lever and
shift into gear. Make sure the engine does
not stall, and vehicle does not creep.
Gradually release the clutch lever and open
the throttle. The vehicle should start
smoothly and accelerate.
•
Check for clutch cable routing.
If proper adjustment cannot be obtained or the
clutch does not work correctly, visit your
Authorised Hero MotoCorp workshop.
NOTE
THROTTLE OPERATION
Cable inspection
Check at full left and full right steering
positions. Inspect the condition of the throttle
cable from the throttle grip down to the
improperly routed, it should be replaced or
rerouted. Standard throttle grip free play (1)
is approximately 2-6 mm of grip rotation.
carburetor. If the cable is kinked, chafed or
Check for smooth rotation of the throttle grip
from the fully open to the fully closed position.
(1) Free play: 2-6 mm
1
Free play adjustment
Slide the boot (2), loosen the lock nut (3) and
turn the adjuster (4).
A
B
3
42
(2) Boot (A) Decrease free play
(3) Lock nut (B) Increase free play
(4) Adjuster