42
(4) Integrated brake arm (5) First adjuster nut
(i) Decrease free play (ii) Increase free play
(i)
(ii)
A
4
5
F
C
Adjustment
• After ensuring the gap, turn the second
adjuster nut counterclockwise by half
rotation.
Ÿ Check the free play of front brake lever.
Ÿ If the free play is more than 20 mm further
turn the adjuster nut to obtain desired free
play.
(c) Integrated brake cable (B) on “C” side
Ÿ Push the integrated brake arm (4) by hand
in the direction as shown.
FREE PLAY: 10-20 mm
Ÿ Turn the second adjuster nut (6) until a gap
is created between joint (7) and the slot on
the first side in integrated brake arm.
(i) Decrease free play (ii) Increase free play
(6) S econd adjuster nut (7) Joint
(i)
(ii)
B6
7
F
C
NOTE
“F” & “C” is marked on integrated brake arm.
Adjustment
(d) Rear brake inspection
•
Park the vehicle on its main stand.
(1) Rear brake pedal (2) Free play: 20-30 mm
1
1
2
To Next Page
Loading...
