3
• To clean Hexcal Studio, use only clean
cleaning tools.
• Do not use any strong cleaning agent or
solvent cleaner. Use a damp cloth and mild
cleaning agent to clean the surface of the
product.
• Always place it on a horizontal, stable, and
even surface. The surface must be resistant
to heat and fluids, like water, coffee, tea, etc.
• The appliance should avoid severe
vibration.
• The product shall not be placed in an
enclosed space, such as a cabinet, when in
use.
• The manufacturer accepts no responsibility
and the warranty will not apply for any
commercial use, inappropriate handling or
use of the product, damage resulting from
use for other purposes, faulty operation,
non-professionals’ repair, or failure to comply
with the instructions.
• Do not use outdoors.
• Use this furnishing only for its intended use
as described in these instructions. Do not
use attachments not recommended by the
manufacturer.
• Do not operate where aerosol (spray)
products are being used or where oxygen is
being administered.
• Do not pull the cord over sharp edges, clamp it,
or allow it to hang down.
• If the supply cord or the plug are damaged, they
must be replaced by the manufacturer, its service
agent, or similarly qualified persons, in order to
avoid all risks.
• Never touch the cord with wet hands.
• Before cleaning and servicing, remove the plug
from the main socket and let the appliance cool
down.
• Electricity and water together are dangerous
and can lead to fatal electrical shocks.
• Never immerse the product or any part of it in
water or other liquid.
To Next Page
Loading...