4
• The product should be placed on a suitable,
stable, long enough surface which should be at
most 1 meter (3.3 ft) from the ground.
• The product and its cord should be against
the wall to avoid tripping and moving the
devices and items placed on the product.
• Hexcal Studio is a delicate, high-tech product,
so please use it with gentle manners and keep
it out of extreme environments.
• Do not disassemble the product unless
supervised by an authorized specialist.
• A damaged product can cause electrical
shocks, burns, and fire.
• All Hexcal products pass stringent controls.
Reliability tests under practical conditions are
performed on randomly selected units. This
can show traces of any previous use.
If in doubt or for further advice, please visit
hexcal.com.
Please save these instructions, and refer to
them when needed.
• Hexcal is not responsible for any data loss or
device damage through misuse or abuse.
• Disconnect the product from the mains when
not in use for a long period. Disconnect by
pulling out the plug and not by pulling the cord
itself or the cord may become damaged.
• Make sure all the other devices connected to
the product are shut down before disconnect-
ing the appliance from the mains.
• Never leave the product unattended during
operation.
• Do not look directly into the light source
provided by this product.
• Do not lift the product unless all the devices
and items on the product are removed.
To Next Page
Loading...