◆ The module TCP Server data is transmitted as follows.
The IP address of the communication test fills in the IP obtained from the router
(AT+WANN command query, SmartAPLink return network information, router DHCP client
search or UDP broadcast packet to scan for IP information, this broadcast scan See the Wi-Fi
Config tool data link below for details.
http://www.hi-flying.com/download-center-1/applications-1/download-item-wifi-config-tools-v1-
0
◆ The module TCP Client data transfer sample is as follows.
Modify AT+NETP as a TCP client, perform client test, and test using High Flying test
server. After the setting is completed, AT+ENTM switches to transparent transmission mode.
To Next Page
Loading...
Need help?
General
