3.4. HTTP Transmissio in STA Mode
The browser accesses http://115.29.164.59:8432/iot?msg=123456788, page effect:
Fill in the HTTP server parameters as follows:
➢ AT+NETP=HTTP,8432,115.29.164.59
➢ AT+HTPTP=GET
➢ AT+HTPURL=/iot,1.1
➢ AT+HTPHEAD=Host:115.29.164.59106:8432<CRLF><CRLF>
After the setting is completed, restart, wait for the serial port output SOCKA status to
indicate the connection is successful (requires AT+EVENT=on to enable this prompt
information function).
The serial port sends a parameter request, and you can see the data replied by the
server.