To Next Page

To Previous Page

reserved

◆ Method 2: The router SSID is modified to UPGRADE-AP and is not encrypted.

The PC network cable or wireless connection is connected to the router. The

module end presses the nReload button and powers up, waiting for the tool to

display the module to be upgraded.

4.5. AT+UPURL Command Mode Upgrade

Put the OTA upgrade file on the local LAN or remote server, you can simply use the

AT command to complete the firmware upgrade. For example, the upgrade file in the

intranet environment is stored in the following location.

http://192.168.1.28:9000/HF-LPT230/MC510_UPGRADE_2MB.bin

Questions and Answers:

Need help?

Do you have a question about the HF HF-LPT230 and is the answer not in the manual?

HF HF-LPT230 Specifications

General