HF Protoss-PW11 - TCP Server Test in AP Mode

HF2211S_EW1X_PW1X Operation Guide
http://www.hi-flying.com/ - 20 -
Step 3：Open IOTService and find the device. The device will allocate IP address to the
STA connected. STA device IP address will be like 10.10.100.XXX.
5.2. TCP Server Test in AP Mode
Step 1：Open TCP&UDP test tool and generate TCP connection as following steps. Device
has already created a TCP Server (port 8899) for use. TCP&UDP test tool can be
downloaded from our website:
⚫ DestIP：IP address of device which can be found by IOTService.
⚫ Port：Port of TCP Server which can be found by IOTService or set by users own.