HF2211S_EW1X_PW1X Operation Guide
http://www.hi-flying.com/ - 37 -
5.9. Restore to Factory Setting
If device works in STA mode and not yet connect to router AP, do the following operation to recover
and reconfig.
⚫ UART Cli command to reload
⚫ nReload button to restore to factory setting.
5.10. More Application Case
See following for more.
http://www.hi-flying.com/download-center-1/application-notes-1/download-item-industry-products-
application-manual-20180415
To Next Page
Loading...
