3.1.3 DST
Step1: enter into system configurationbasic configurationDST; refer to Fig. 3-5:
Fig. 3-5 basic configuration-DST
Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button
to exit current interface.
3.2 Live configuration
Live configuration includes four submenus: live, host monitor, SPOT and mask.
3.2.1 Live
In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast.
enter into system configurationlive configurationlive; refer to Fig 3-6:
Fig. 3-6 live configurationlive
3.2.2 Main monitor
Step1: enter into system configurationlive configurationmain monitor; refer to Fig 3-8:
Fig. 3-8 live configuration-main monitor
To Next Page
Loading...
