General Operations
Close
Figure 4-11
2. Slide battery towards to “Close” end (as the above arrow direction)
until battery is locked
3. After connecting battery with the charger, the “Charging” led
becomes red.
Warning: 1. Only using Hi-Target specified charger and
do not put the battery into fire nor make it
short circuit.
2. If heating, deformed, leaking, bad smells ha
ppens while charging, using or storing,
please stop using the battery rig ht now and
change another one.
3. If the working time obviously become very
short, please stop using the battery rig ht
now and change another one.
36
To Next Page
Loading...