Configuration of Fieldwork
Fast Operation Guide
Rover or base mode with built-in GPRS or 3G module.
1. Set base/rover
Double click F1 with the vo ice prompt “base”, “rover” and
“ static” to choose the wor king mode you need, press power button to
confirm the setting .
2. Set GPRS data link
Double click F2, then choose GPRS mode from GPRS and
external radio then click the power button to confirm.
3. GPRS setting
There are two ways. One is using the Controller with Hi-RTK
software, please refer to H i-RTK manual to find more details on how
to do the settings. T he other way is by using the management software.
Connectin g the receiver to PC with Y type cable, then open the
managem ent software of A8 receiver, choose the serial port and then
open it. After the instrument is connected, do the settings through the
management software of A8 receiver. Refer to figure 5-6.
48
To Next Page
Loading...
Need help?
General
