Configuration of Fieldwork
Introduction
In this section, the working program and Easy of Use for the
base and rover of A8 G NSS RTK are introduced. According to the
system of A8 GNSS RTK which is required by the customer, only
the customer who buys the module can get the relative configuration
of working program and the configuration of working program. The
below is not for all the customers who buy the system of A8 GNSS
RTK. Please refer to the relative configuration of working program
for the instrument which you buy.
Diagram for base working
Base Mainframe
Tribrach
Tripod
Figure5-1 working mode for base with built-in GPRS/3G
44
To Next Page
Loading...