Hi-Target V30 Plus - Button & Indicator Lamp; Button Function

V30 Plus GNSS System User Manual
7
2.2 Button & Indicator Lamp
2.2.1 Button Function
Table 2-2-1 Button Function Description
Function
Description
Power-On
Long press the button for 1 second.
Power-Off
In the power-on state, long press button more than 3 seconds and less than 6 seconds,
the first voice of the speaker Dingdong, release the button to normal shutdown.
Auto-Set Base
In power off status, long press power button for 6s will enter the state of setting base
station automatically, then release it; the receiver will automatically set base mode.
Work Mode
Switch
Double click power button to enter the state of work mode switch, every double click
will switch to another work mode.
Work Mode
Single click to confirm the current work mode.
State Query
See appendix.
Reset Main
Board
In power on status, long press power button for more than 6s when voice prompts the
second dingdong, then release it.
Mandatory
Power Off
In power on status, long press power button for more than 8s.
Appendix
Table 2-2-2 Detailed Description of the Status Query Function
Function
Description
GSM Base Station
GSM Base Station
UHF Base Station
UHF Base Station, Channel X, Power X
External Base Station
External Base Station
GSM Rover
GSM Rover
UHF Rover
UHF Rover, Channel X
Controller Differential Rover
Station
Controller Differential Rover Station
External Rover
External Rover
Static
Static Interval X, Elevation Angel X, Existential Space Surplus X, Satellite
Number X