2.3.3 Static Data Download
Figure 2-3-2 Static Data Storage
V30 Plus receiver file management using U disk storage, plug-and-play, direct drag-and-
drop download, do not need to download the management software. V30 Plus receiver
can only download static data by using U disk mode, and can not write to the V30 Plus
receiver.
V30 Plus receiver can download data through U-disk, use Mini USB cable when
downloading. Connect the receiver with computer by the Mini USB data cable. After the
connection, a static code appears in the computer, then copy the collected static files out
by opening the disk.
Figure 2-3-3 Static Drive
After downloading, steps of editing the point name and antenna height are:
1.Select *.GNS static files, double click the mouse;
2.Pop up the Document Edit dialog box, edit the point name and input the antenna height,
then click OK.
Notice: When the storage space inside and outside the receiver is less than 2
MB, the data lamp (Red Light) fast flashes and then stops recording, meanwhile
the existing data files will not be overwritten.
To Next Page
Loading...
