Figure 2-3-4 Edit File
2.4 Dynamic RTK Survey
The dynamic RTK measurement can be based on the propagation mode of the differential
signal for the radio mode (internal radio, external radio, external station) and network
mode.
1. Erection of Instrument
The receiver is mounted on a stable known point or unknown point. In order for the
receiver to be able to search for a large number of satellites and high-quality satellites, the
base station should generally be selected in the open field of view around, to avoid large
buildings and patches within the height of 15 degrees. At the same time, in order to further
spread the differential signal, the reference stations should be erected in the higher
position.
2. Connect the Device
Start the Hi-Survey measurement software on the hand-held controller and enter the
Device interface. Generally, use Bluetooth or Wi-Fi connection.
Figure 2-4-1 Bluetooth Connect Figure 2-4-2 Device Connect
Notice: Static files in removable disks can not be deleted directly, we can use
controller software to conduct
To Next Page
Loading...
