HID VertX V1000 - Page 22

VertX Installation Worksheet
V100-Series Information (If V2000, there is a V100 at Interface Address 0 built-in):
Interface Type:
Interface Address: (0-31)
(V100, V200, V300, V2000)
Tamper: AC Fail: BATT Fail:
Reader 1:
Reader 2:
V100 Door /
Interface
Reader
Door Switch 1: REX 1: Door Switch 2: REX 2
Strike Relay 1: Aux Relay 1: Strike Relay 2: Aux Relay 2:
Input 1:
Input 2: Input 3: Input 4:
Input 5: Input 6: Input 7: Input 8:
V200 Input
Interface
Monitor
Input 9: Input 10: Input 11: Input 12:
Input 13: Input 14: Input 15: Input 16:
Relay 1: Relay 2:
Relay 1: Relay 2: Relay 3: Relay 4:
V300 Output
Interface
Relay 5: Relay 6: Relay 7: Relay 8:
Control
Relay 9: Relay 10: Relay 11: Relay 12:
Input 1: Input 2:
October 2006 Page A2
2006 © HID Global. All rights reserved.