5 - 60
1 PREAMBLE
This manual indicates the intended use of the unit and provides instructions on transportation, installation, assembly, adjustment
and use. It provides information on maintenance, ordering spare parts, the presence of residual risks and personnel training.
The user manual must be read and used as follows:
- each operator and the personnel involved in the use and maintenance of the unit must read this manual completely and with the
utmost attention and respect what is reported;
- the employer is obliged to ensure that the operator possesses the skills required to operate the unit and has carefully read the
manual; the employer must also provide the operator with details about the risk of accidents, especially those deriving from
noise, about the personal protective equipment provided and the general accident-prevention regulations, required by
international laws or regulations or those applicable in the country of use;
- the manual must always be available to the user, managers and operators in charge of transportation, installation, use,
maintenance, repairs and final dismantling;
- keep the manual away from sources of humidity and heat and treat it as an integral part of the unit for its entire duration, passing
on the manual to any other user or subsequent owner of the unit;
- make sure that any update is included in the text;
- under no circumstances are any parts of the manual to be removed, torn or rewritten. If the manual is mislaid or partially damaged
and, therefore, the contents can no longer be fully read, a new manual should be requested from the manufacturer by
communicating the serial number of the machine found on the data plate.
Pay utmost attention to the following symbols. Their purpose is to highlight specific information such as:
Dangerous situations that could arise while using the unit, in order to guarantee personal safety.
Dangerous situations that could arise while using the unit, in order to prevent damaging property
and the unit itself.
Additional information or suggestions for the unit to be used correctly.
The manufacturer has the right to update the production and manuals, without being obliged to update previous versions, except
for exceptional cases.
This manual reflects the applicable technology at the time the unit is sold and cannot be considered inadequate due to subsequent
updates based on new technology.
For any requests for updates of the use and maintenance manual or supplements, which are to be considered an integral part of the
manual, please refer to the contact information indicated in this manual.
Contact the manufacturer for further information and to submit any proposals on how to improve the manual.
The manufacturer kindly asks you to communicate the address of the new owner if the unit is passed on to third parties, in order to
facilitate the forwarding of any supplements of the manual to the new user.
To Next Page
Loading...
