37 - 60
7.2 POSITIONING
All the DDS - DCS - DVS and DOS models are designed and built for indoor installation.
Do not install the unit outdoors and make sure that it is not exposed to atmospheric agents such
as: rain, hail, humidity and frost.
Pay attention to the following aspects when choosing the best place to install the unit and the relative connections:
- dimensions and origin of hydraulic pipes (if present);
- Place of the power supply;
- accessibility for use, maintenance and repair operations;
- solidity of the anchoring plane;
- avoid fixing the machine to high heights to avoid high temperature blocks.
It is of utmost importance to ensure complete accessibility to the unit.
The installation of anti-vibration material is recommended for each anchor point or support point to avoid noise and vibration
transmissions.
7.2.1 DDS respect spaces
7.2.2 DCS respect spaces
To Next Page
Loading...
