Hifonics X3-ZEUS User Manual

31
OPTIONAL ACCESSORIES
BALANCED INPUT
With the optional BALANCED INPUTS, HiFonics offers an absolutely state-of-the-art-technology. Balanced inputs have
been used for many years in professional sound studios and high end home stereo systems. Unlike the regular
unbalanced RCA's connections, balanced wires are insusceptible against interferences of the vehicle's electronics.
Therefor an separate signal transmitter like described below is required.
SUITABLE HiFONICS BALANCED LINE TRANSMITTER
HF2BLT
Balanced-Line-Transmitter for 2-Channel- or
Mono-Amplifiers in a stable metal-housing.
With RCA-Inputs and Balanced-Line-Outputs.
Incl. Balanced Line Cable (5 m).
HF4BLT
Balanced-Line-Transmitter for 4-Channel- or
two Mono-Amplifiers in a stable metal-housing.
With RCA-Inputs and Balanced-Line-Outputs.
Incl. 2 x Balanced Line Cable (5 m).
BALANCED LINE TECHNOLOGY
HF25WK PREMIUM
• 25 mm
2
Powercable, 5 m,
• 25 mm
2
Groundcable, 1 m,
• Mini-ANL Fuseholder
with 100 A Fuse
• Twisted, triple-shielded
Stereo-RCA-cable, silvered metal jacks,
included remote-wire,
directional-ground-looped, 5 m
RECOMMENDED AMPLIFIER INSTALLATION KITS
HF35WK PREMIUM
• 35 mm
2
Powercable, 5 m,
• 35 mm
2
Groundcable, 1 m,
• Mini-ANL Fuseholder
with 150 A Fuse
• Twisted, triple-shielded
Stereo-RCA-cable, silvered metal jacks,
included remote-wire,
directional-ground-looped, 5 m

Hifonics X3-ZEUS Specifications

General

Frequency Response	10 Hz - 250 Hz
Input Sensitivity	200mV - 6V
Signal to Noise Ratio	95 dB
Crossover Type	Variable
Low Pass Crossover Frequency	250Hz
Bass Boost	0dB - 12dB
Phase Shift	0° - 180°