BIOS Configuration Utility
3.1 Entering the BIOS Configuration Utility
When the following information is displayed on the screen during bootup, press
CTRL+H key access the BIOS configuration utility.
The main interface of BIOS configuration utility is as below:
This column lists all currently available operation commands.
This column lists all the hard disks and disk arrays connected to the
adapter. When this column is activated, select the target device to
perform a specific operation.
Help: This column displays help information about the current selected item
and the prompt on available operations.
Main Menu:
Status:
3-1
To Next Page
Loading...
Need help?
General
