Hikmicro GRYPHON Series User Manual

Thermal Monocular User Manual
21
5.3 Burning Prevention
This function can prevent the detector of the thermal channel from being burned. When enabling
this function, the shield will close if the grey scale of the detector reaches a certain value.
Steps
1. Hold to show the menu.
2. Rotate the wheel to select , and press to enable or disable the burn-prevention function.
Note
Avoid direct sunlight and enable the burning prevention function to reduce the risk of sensor
damage from the heat.
5.4 Capture and Video
5.4.1 Capture Picture
In the main live view interface, hold or press to capture pictures. The device supports
capturing pictures while recording videos.
Note
When capturing succeeds, the image freezes for 1 second and a prompt shows on the display.
For exporting captured pictures, refer to Export Files.
5.4.2 Record Video
Steps
1. In the live view interface, press / and at the same time to start recording.

Hikmicro GRYPHON Series Specifications

General

Detector Pitch	12 μm
Frame Rate	50 Hz
Video Recording	Yes
Photo Capture	Yes
Ingress Protection	IP67
Thermal Resolution	384 × 288 or 640 × 512
Detection Range	Up to 1800 m
Display	1024x768
Lens Options	35mm
Battery Type	Rechargeable Li-ion
Wi-Fi	Yes
Objective Lens Diameter	35mm
Operating Temperature	-20 °C
Digital Zoom	1 ×, 2 ×, 4 ×, 8 ×