Thermal Monocular User Manual
7
Figure 2-3 Install the Battery Cover
4. Rotate the battery cover clockwise to fix it.
2.3 Power On/Off
Power On
When the battery is enough, hold for 2 seconds to power on the device.
Power Off
When the device is turned on, hold for 2 seconds to power off the device.
Note
● Power-off countdown will appear when you power off the device. You can press any key to
interrupt the countdown and cancel the power-off.
● Automatic low battery power-off cannot be canceled.
Auto Power Off
You can set the auto power off time for your device.
Steps
1. Hold to go to the menu.
2. Rotate the wheel to select , and press to select the auto power off time as required.
3. Hold to save and exit.
Note
● See the battery icon for the battery status. means the battery is fully charged, and
means that the battery is low.
● When the low power note shows, charge the battery.
● The auto power off countdown will start again when the device exits standby mode, or the
device is restarted.
2.4 Menu Description
When the device is turned on, hold to show the menu.
In the menu, you can rotate the wheel to select functions, press to configure the selected
function, and hold to exit the menu.
To Next Page
Loading...
Need help?
General
