Thermal Image Scope User Manual
24
Note
Avoid direct sunlight and enable the Burning Prevention function to reduce the risk of sensor
damage from the heat.
6.4 Capture and Video
6.4.1 Capture Picture
In the live view mode, hold to capture picture.
Note
When capturing succeeds, the image freezes for 1 second and a prompt shows on the display.
For exporting captured pictures, refer to Export Files.
6.4.2 Record Video
Steps
1. In the live view mode, press and the wheel at the same time to start recording.
Figure 6-1 Start Recording
The left top of image displays the information of recording time.
2. Press and the wheel at the same time again to stop recording.
What to do next
For exporting recording files, refer to Export Files.
6.4.3 Set Audio
If you enable the audio function, the sound will be recorded with the video. When there is too
To Next Page
Loading...
Need help?
General
