Hikmicro PANTHER 2.0 Series - 6.5 Hot Tracking

Thermal Image Scope User Manual
25
loud noise in the video, you can disable this function.
Steps
1. In the main menu, rotate the wheel to select .
2. Press the wheel to enable this function.
3. Hold the wheel to save and exit.
6.4.4 Prerecord Video
After enabling this function, the device can automatically record the 7 seconds before and after
the recoil-activation.
Steps
1. In the main menu, rotate the wheel to select .
2. Press the wheel to enable this function.
3. Hold the wheel to save and exit.
Note
If you activate recoils continuously, the device will record the 7 seconds before the first recoil
until the 7 seconds after the last recoil.
6.5 Hot Tracking
The device can detect the highest temperature spot in the scene and mark it on display.
Steps
1. In the main menu, rotate the wheel to select .
2. Press the wheel enable hot tracking.
3. Hold the wheel to save the settings and exit.
Result
When the function is enabled, displays in the spot of highest temperature. When the scene
changes, the moves.