HikRobot SC7000 Series - Indicator Status Details

SC7000 Series Smart Camera User Manual
5
Note
You should refer to the table above and the label attached to the power and I/O cable to wire the
device.
3.2 Indicator Status
Read following sections to get the indicator status of the device.
Table 3-2 LED Status Definition
Status
Description
Solid
The indicator is in solid all the time.
Unlit
The indicator is unlit all the time.
Fast flashing
Flashing interval: 200 to 300 ms
Slow flashing
Flashing interval: 1000 ms
Super slow flashing
Flashing interval: 2000 ms
Table 3-3 Description
Device Status
PWR Indicator
LNK Indicator
ACT Indicator
U1/U2
The device is
powered off.
--
The device is
powered on.
Solid blue
Solid green
Slow/fast
flashing yellow
U1 is unlit, and
U2 is slow
flashing blue.
Power supply
exception
Unlit
Network
exception
Solid blue
Unlit
U1 is unlit, and
U2 is slow
flashing blue.
Device software
exception
Solid blue
Solid green
Flashing yellow
U1 and U2 are
unlit.
Device exception
Solid blue
Solid green
Solid yellow
U1 and U2 are
solid blue.