SC7000 Series Smart Camera User Manual
64
to different operation modules.
Note
● The admin can access to all operation and tool modules via web, and assign module operation
permission to technician, while technician can access to and set module parameters assigned by
the admin only.
● If the technician permission is not enabled, you cannot log in as technician via web.
● The default technician password is Abc1234.
Click User Management, enable Technician Permission to enable technician permission, enter
Technician PWD, and click OK.
You can check Assign Permission to Technician in respective module to assign module operation
permission to technician, or go to Solution → Others → Permission Assignment to assign
permission to the technician.
Figure 10-2 Set Technician Permission and Password
10.2 Image Saving Management
Image saving management allows you to search, delete, download, and import images that are
saved via the image saving tool.
You can set specific time range to search images, and click Search to search images. If you want to
delete, download or import images to test library, check images first, and click Delete Image,
Download Image or Import to Test Library correspondingly. You can also click Clear Image to clear
all images.
Figure 10-3 Image Saving Management
To Next Page
Loading...
