HikRobot SC7000 Series - TCP Server and Serial Communication; 8.5.3 TCP Server Configuration; 8.5.4 Serial Communication Settings

SC7000 Series Smart Camera User Manual
50
8.5.3 TCP Server
In basic parameter interface, set output information as Input Variable, and enter Local IP and
Local Port according to actual demands.
Note
Input Variable currently supports format result data or result of other communication tools.
In display interface, enable Display Text to set text's color, front size, transparency, position X, and
position Y.
Figure 8-29 TCP Server
8.5.4 Serial
In basic parameter interface, set output information as Input Variable, and enter Serial Port
Mode, Baud Rate, Parity Bit and Stop Bit according to actual demands.
Note
● Data Bit is 8 by default, and it can be read only.
● Input Variable currently supports format result data or result of other communication tools.
In display interface, enable Display Text to set text's color, front size, transparency, position X, and
position Y.