SC7000 Series Smart Camera User Manual
6
Chapter 4 I/O Wiring
4.1 Input
The device's Line 0/1/2 is opto-isolated input, and their internal circuit is as follows.
Note
● The input voltage ranges from 5 VDC to 30 VDC.
Figure 4-1 Internal Circuit of Input Signal
4.2 Output
The device's Line 3/4/5 is opto-isolated output, and their internal circuit is as follows.
Note
● The input voltage ranges from 5 VDC to 30 VDC.
● The maximum current is 200 mA.
● Do not directly connect with inductive load (e.g. DC motor, etc.) when outputting.
Figure 4-2 Internal Circuit of Output Signal
To Next Page
Loading...
