HikRobot SC7000 Series - Automatic White Balance and Image Acquisition; AWB Mode Settings; 8.2 Image Acquisition Settings

SC7000 Series Smart Camera User Manual
22
AWB Mode
Note
This parameter is only available for the color device and rgb is selected as pixel format.
AWB stands for Automatic White Balance, and the device adjusts color according to different
light sources. If you want to use AWB function, you should enable AWB Enable first.
There are 2 types of AWB mode, including manual and auto. If AwbAuto is selected as AWB
Mode, the device will automatically adjust AWB parameters according to actual conditions. If
AwbManual is selected, you can manual edit AWB parameters.
Figure 8-5 Set AWB Mode
8.2 Image Acquisition Settings
This section introduces how to set image acquisition related parameters, such as, trigger mode,
trigger source, trigger cache, etc.
Note
Make sure that the solution is in continuous operation status when you use external trigger mode
to acquire images.
8.2.1 Set Trigger Mode
The device has 2 types of trigger mode, including internal trigger mode and external trigger mode.
OFF refers to internal trigger mode, and ON refers to external trigger mode.
Internal Trigger Mode
In this mode, the device acquires images via its internal signals.
External Trigger Mode
In this mode, the device acquires images via external signals like software signal, hardware
signal, communication string, etc.