SC7000 Series Smart Camera User Manual
21
Gamma: Gamma correction provides a non-linear mapping mechanism. When Gamma value is
between is 0 and 1, image brightness increases, and dark area becomes brighter. When Gamma
value is between 1 and 4, image brightness decreases, and dark area becomes darker.
Mirror Image: If enabled, the image will be reversed in a horizontal way.
Figure 8-3 Set Image
CCM Reset
Note
This parameter is only available for the color device and rgb is selected as pixel format.
CCM stands for Color Correction Matrix, and it is used to help improve inter-instrument
agreement in display and light sources measurements.
You can click Edit to adjust R, G and B value according to actual conditions, and their range is
from -15.99 to +15.99, and click Apply to apply. You can click CCM Reset to reset parameters.
Figure 8-4 Set CCM
To Next Page
Loading...
