SC7000 Series Smart Camera User Manual
46
8.4.11 Format Tool
This tool is used to integrate and format data, and output string. In basic interface, you can click
to subscribe data that is needed formatting, click to add text information, click to
add semicolon, and then click OK.
Note
When configuring multiple data, if one of data cannot be obtained, format exception may occur.
In display interface, enable Display Text to set text's color, front size, transparency, position X, and
position Y.
Figure 8-24 Format Tool
8.4.12 Logic Tool
This tool allows you to select different logical operation types and execute logic operation.
Select AND, OR, NOT, NAND or NOR as Logical Operation Type, and click to link data source
or enter data directly. You can also click to add multiple data.
Note
If there is logic module in the solution, you can go to Solution → Others → Solution Result to link
the result of logic tool to the solution.
To Next Page
Loading...
