SC7000 Series Smart Camera User Manual
67
device.
Firmware updating allows you to view current device firmware version, and update firmware.
Note
● Make sure the device and solution stop operation when updating the firmware.
● After updating, the device will automatically reboot, and the web will automatically jump to
login interface.
● Only the admin can update firmware and restore factory settings.
You can select update file from the local PC, and click OK to update firmware.
Figure 10-8 Update Firmware
If you want to restore the device to factory settings, enter Admin Password and click OK.
Note
Device solutions will be deleted after restoring defaults. You may log in again, and the admin
password will be the default one (Abc1234).
Figure 10-9 Restore Factory
You can also click Reboot to reboot the device.
To Next Page
Loading...
