HIKVISION 9 Series User Manual

Steps
1.
T
ap Sengs →
→ Password t
o enter the password sengs page.
Figure 2-9 Password Sengs
2.
T
ap Unlock Password, Arm/Disarm, or Duress Code to pop up the password
sengs dialog box.
Unlock P
assword
Enter the unlock password and room No. on the door staon
to open the
door.
Arm/Disarm
Create an arm/disarm password before conguring alarm parameters.
Arm or disarm the zone for the indoor staon by entering the arm/disarm
password.
Note
Arm/Disarm
sengs page is hidden by default. Tap Sengs →
→
Short
cut Sengs to enable Zone Alarm Locally, you can edit the alarm
parameters.
Duress Code
When y
ou are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to nofy the management center
secretly.
Note
The duress code and the unlock password cannot be the same.
3.
Enter the old password.
Video Intercom 9 Series Indoor Staon
Conguraon Guide
9

HIKVISION 9 Series Specifications

General

Brand	HIKVISION
Model	9 Series
Category	Intercom System
Language	English