HIKVISION 9 Series

2.2.3 Set Indoor Staon No.
Indoor staon No. and the indoor extension No. are numbers, which can be dialed
b
y other devices to call the indoor staon and the indoor extension in an intercom
system. The indoor staon No., is composed of the oor No. and the room No.
The indoor extension No. should be a numeric from 1 to 5.
Up to 5 indoor extensions can be set for 1 indoor staon.
Steps
1.
Tap Sengs →
→ Conguraon → t
o enter the indoor staon No. sengs
page.
Note
Default admin password is the acvaon password.
Figure 2-5 Set Indoor Staon No.
2.
Congure
the indoor staon and indoor extension informaons.
-
Select Indoor Staon as Indoor Staon Type. Tap Room Informaon to edit
the Room No., Community No., Building No., Unit No., Floor No. and Room
No.
-
Select Indoor Extension as Indoor Staon Type. TapRoom Informaon to
edit the Room Name and Extension No.
2.2.4 Add Camera
Steps
1.
T
ap
Sengs →
→ Conguraon → t
o enter the device management page.
Video Intercom 9 Series Indoor Staon Conguraon Guide
5