HIKVISION 9 Series

Steps
1.
T
ap Sengs → Cloud Ser
vice to enter the sengs page.
2.
Enable Cloud Service.
3.
Edit LBS server and Vericaon Code.
Note
Vericaon code is used to add the device to mobile client.
4.
Oponal: Sc
an QR code on the screen to add the device to the mobile client.
2.9 Shortcut Sengs
Tap Sengs →
→ Shortcut Sengs to enter the sengs page.
Figure 2-13 Shortcut Sengs
You can enable the Call Ele
vator, Zone Alarm Locally and Call Management Center
shortcut.
Note
Call Elevator and Z
one Alarm Locally funcons are disabled by default.
Video Intercom 9 Series Indoor Staon Conguraon Guide
14