HIKVISION 9 Series

3.3 System
Conguraon
You can congure the video intercom parameters accordingly.
Steps
1.
Click Maintenance and Management → System Conguraon → Acs and
videoIn
tercom to enter the system conguraon page.
2.
Enter the required informaon.
Ringtone
Click ... and select the audio le from the local path for the ringtone of
indoor staon.
Oponally, you can click
for a
tesng of the audio le.
Max. Ring Duraon
Input the maximum duraon of the ringtone, ranging from 15 seconds to 60
seconds.
Max. Speaking Duraon with Indoor Staon
Input the maximum duraon of speaking with the indoor staon, ranging
fr
om 120 seconds to 600 seconds.
Max. Speaking Duraon with Door Staon
Input the maximum duraon of speaking with the door staon, ranging from
90 seconds to 120 seconds.
3.
Click Save to save the sengs.
3.4 Remote Conguraon
In the device list area, select a device and click
to enter the remote conguraon
page.
3.4.1 System
Click S
ystem on the remote conguraon page to display the device informaon:
Device Informaon, General, Time, System Maintenance, User, and RS-485.
Video Intercom 9 Series Indoor Staon
Conguraon Guide
19