HIKVISION 9 Series User Manual

Before You Start
T
ap Sengs →
→ Shortcut Sengs to enable Z
one Alarm Locally.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm
funcon rst.
1.
T
ap Sengs →
→ Scene Sengs to enter the arming mode sengs page.
2.
T
ap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Figure 2-8 Arming Mode
Sengs
3.
Arm the select
ed zone.
Note
•
Z
ones are
congurable on the arming mode page.
•
24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
•
Arming mode sengs should be congured with the sengs of arming
s
tatus on the user page of the device.
2.3 Password Sengs
You can edit the duress code, unlock password and arm/disarm password of the
indoor staon.
You can edit the arm/disarm password of the indoor extension.
Video Intercom 9 Series Indoor Staon
Conguraon Guide
8

HIKVISION 9 Series Specifications

General

Brand	HIKVISION
Model	9 Series
Category	Intercom System
Language	English