HIKVISION 9600 Series - Handling Exceptions Alarm

User Manual of 9600/8600/7700/7600 Series NVR
126
8.5 Handling Exceptions Alarm
Purpose:
Exception settings refer to the handling method of various exceptions, e.g.
• HDD Full: The HDD is full.
• HDD Error: Writing HDD error or unformatted HDD.
• Network Disconnected: Disconnected network cable.
• IP Conflicted: Duplicated IP address.
• Illegal Login: Incorrect user ID or password.
• Abnormal Record/Capture: No space for saving recorded files or captured images.
• Array Exception: Abnormal virtual disks exist under array.
Note: Array Exception is only supported by 9600-R series NVR.
Steps:
Enter Exception interface of System Configuration and handle various exceptions.
Menu> Configuration> Exceptions
Please refer to Chapter Setting Alarm Response Actions for detailed alarm response actions.
Figure 8. 15 Exceptions Setup Interface