User Manual of 9600/8600/7700/7600 Series NVR
31
7700/7600S-P8
Figure 2. 5 Network Configuration
Note: Dual-NIC is only supported in 9600/R/X and 8600 device. And for 7700/7600S-P8 series NVR, the internal
NIC IPv4 address should be configured for the cameras connecting to the PoE network interface of the NVR.
7. Click Next button after you configured the network parameters, which takes you to the Array Management
window (supported by 9600-R series only).
Figure 2. 6 Array Management
8. Click Next button after you configured the network parameters, which takes you to the HDD Management
window, shown in Figure 2. 7.
To Next Page
Loading...
Need help?
General