HIKVISION AX PRO DS-PWA64-L-WE User Manual

AX PRO User Manual
41
2. Connect to a Wi-Fi.
Manually Connect: Input the SSID Wi-Fi and Wi-Fi Password, select Encryption Mode and click
Save.Select from Network List: Select a target Wi-Fi from the Network list. Click Connect and input
Wi-Fi password and click Connect.
3. Click WLAN to enter the WLAN page.
4. Set IP Address, Subnet Mask, Gateway Address, and DNS Server Address.
Note
If enable DHCP, the device will gain the Wi-Fi parameters automatically.
5. Click Save.
Cellular Network
Set the cellular network parameters if you insert a SIM card inside the device. By using the cellular
network, the device can upload alarm notifications to the alarm center.
Before You Start
Insert a SIM card into the device SIM card slot.
Steps
1. Click Communication Parameters → Cellular Data Network to enter the Cellular Data
Network Settings page.

HIKVISION AX PRO DS-PWA64-L-WE Specifications

General

Brand	HIKVISION
Model	AX PRO DS-PWA64-L-WE
Category	Security System
Language	English