AX PRO User Manual
51
NAT
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices. The UPnP protocol allows devices
to connect seamlessly and to simplify the implementation of networks in the home and corporate
environments.
Enable the UPnP function, and you don’t need to configure the port mapping for each port, and
the device is connected to the Wide Area Network via the router.
Steps
1. Click Communication Parameters → NAT to enter the page.
2. Drag the slider to enable UPnP.
3. Optional: Select the mapping type as Manual
4. Set the HTTP port and the service port.
5. Click Save to complete the settings
4.3.2 Device Management
Zone
You can set the zone parameters on the zone page.
Steps
1. Click Device → Zone to enter the Zone page.
To Next Page
Loading...
Need help?
General
