HIKVISION AX PRO DS-PWA64-L-WE - Setup ATS in Transceiver of the Panel

AX PRO User Manual
77
Setup ATS in Transceiver of the Panel
Steps:
1. Login using installer account from local web client.
2. Click Communication→ Alarm Receiving Center (ARC), and enable Alarm Receiving Center 1.
 = Protocol Setting =
Protocol Type
— ADM-CID
— SIA-DCS
— *ADM-CID
— *SIA-DCS
Select token supported by the receiver in the ARC. Choose the token with “*” mark to
improve the communication security.