AX PRO User Manual
61
3. Set the keyfob parameters.
Name
Customize a name for the keyfob.
Permission Settings
Check different items to assign permissions.
Single Key Settings
Select from the drop-down list to set I key and II key's functions
Combination Keys Settings
Select from the drop-down list to set combination keys' functions.
4. Click OK.
5. Optional: Click to edit the keyfob information.
6. Optional: Delete a single keyfob or check multiple keyfobs and click Delete to delete the keyfobs
in batch.
Add/Edit/Delete Tag
You can add tag to the AX PRO and you can use the Tag to arm/disarm the zone. You can also edit
the tag information or delete the tag from the AX PRO.
Steps
1. Click Device → Tag to enter the management page.
2. Click Add and place a Tag on the Tag area of the AX PRO.
3. Customize a name for the Tag in the pop-up window.
4. Select the Tag type and Tag linked area.
5. Select the permission for the Tag.
Note
You should allocate at least a permission for the Tag.
6. Click OK and the tag information will be displayed in the list.
Note
The Tag supports at least 20-thousand serial numbers.
7. Optional: Click and you can change the Tag name.
8. Optional: Delete a single Tag or check multiple Tags and click Delete to delete Tags in batch.
To Next Page
Loading...
Need help?
General
