AX PRO User Manual
64
heartbeat is detected, the system will upload an event.
Note
For EN, do not switch to OFF.
Arming with Fault
If the option is enabled and there are active faults in a zone, the zone will be bypassed
automatically when arming.
Note
You should disable the arming function in the Advanced Settings page. Or the AX PRO arming
with fault function cannot be valid.
AX PRO Status Notification
If the option is enabled, the device will upload report automatically when the AX PRO status is
changed.
Disable Function Key
If the option is enabled, all function keys will be disabled.
Voice Prompt
If the option is enabled, the AX PRO will enable the text voice prompt.
Voice Prompt of Disarming and Alarm Clearing
If the option is enabled, the AX PRO will broadcast all system faults before disarming and alarm
clearing. Before enable this function, you need to enable Voice Prompt.
System Volume
The available system volume range is from 0 to 10.
Authority Advanced Settings
Set advanced authority parameters.
Click System → System Options →Arming Progress to enter the Advanced Settings page.
To Next Page
Loading...
Need help?
General
