Quick Operation Guide of DS-1100KI Network Keyboard
10
Notes:
In the local live view mode when you input 0+MON keys, the multi-division display mode is not supported.
Corresponding error message will appear on the screen when user performs wrong operation. E.g., when the
multi-division number entered is not supported by the current output monitor, the message ”wrong
operation” will appear.
3.2.2 Displaying Decoded Video on Monitor
The selected input signal can be outputted and displayed by the decoding channel on the monitor. Currently, the
supported decoding resolution includes: QCIF, CIF, DCIF, 2CIF, 4CIF, 720p, 1080p, VGA, UXGA, etc. The output
interface can be selected to BNC/VGA/HDMI/DVI.
Steps:
1. Press the Num + MON keys to select the monitor.
2. Press the Num + WIN keys to select the display window on the monitor.
You can also directly touch the screen to select the display window.
3. Press the Num + CAM keys to select the input camera.
Example:
You can input the “1+MON, 2+WIN, 3+CAM” keys to decode the video signal from camera 3 and display it on
window 2 of monitor 1.
When you press the 0+CAM keys, it will stop the dynamic decoding of the current window. If no display window is
selected, the decoding of the 1
st
window will be stopped by default.
Description of icons:
Note: Corresponding error message will appear on the screen when you perform wrong operation.
3.3 PTZ Control
If the camera connected to the keyboard supports PTZ function, you are allowed to operate the
LIGHT/FOCUS/IRIS/ZOOM/WIPER buttons and joystick to realize PTZ control in the live view mode of the decoded
video.
Two operation methods can be used to realize PTZ control:
Method 1:
1. Press the Num + MON keys to select the monitor.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
