HIKVISION DS-1100KI Quick Operation Guide

Quick Operation Guide of DS-1100KI Network Keyboard
5
Chapter 2 Quick Configuration Guide
Steps:
1. When the keyboard has started up, it enters the following interface:
2. For basic keyboard operation, select the Keyboard icon to continue and enter the login interface.
3. Select admin on the login interface and then input the admin password (default: 12345) to enter the admin
interface of keyboard operation.
4. Click Keyboard > Network to enter the Network Settings interface.
Configure the network settings of the keyboard, including the Port, IP address, Subnet Mask, Default
Gateway, Primary DNS and Secondary DNS. Click Apply to save the settings.

HIKVISION DS-1100KI Specifications

General

Split keyboard	No
Keyboard layout	-
Device interface	RS-232 + RS-485 + RJ-45
Recommended usage	Office
Keyboard form factor	Mini
Connectivity technology	Wired
Display type	TFT
Product color	Black
Keyboard style	Straight
Ergonomic design	Yes
Product type	Control panel
Housing material	Plastic
Quantity per pack	1 pc(s)
USB 2.0 ports quantity	1
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Operating voltage	12 V
Power source type	DC

Weight and Dimensions

Depth	110 mm
Width	435 mm
Height	193 mm
Keyboard weight	2000 g
Keyboard dimensions (WxDxH)	435 x 110 x 193 mm